Area Cropping

Milesight CMS supports 4K Area Cropping. The function is to crop the framed area according to the user’s settings to form a stream channel, thereby obtaining more area details; user can also set auto tracking for cropping areas.

[Area Settings]

Setting Area Cropping can refer to steps as below:

Step1: Enable Area Cropping function;

Step2: Click [Add] to add Cropping area, and you can also drag the Cropping area on the screen;

Step3: Choose area size, then click [Save]

Note: Only the Primary Stream channel can be made Area Cropping configuration.

[Auto Tracking]

The meanings of the items can be referred to the table below:

Table 1. Description of the buttons
Parameters	Function Introduction
Viewing Area	Choose cropping area that you set before to set Note: If you do not add viewing areas, then you can not use the function as shown below:
Enable Auto Tracking	Check the checkbox to enable Auto Tracking
Schedule	Click [Edit] to set Auto Tracking schedule as shown below:

Note: You can not use both the auto tracking of VCA events and auto tracking of Area Cropping at the same time.