VCA

The VCA page is as below:

VCA(for non-AI cameras)

VCA(for AI cameras)

Note: For fisheye camera, only when you choose the original view and the panoramic view under Multi-Channel mode or 1O/1P display under Bundle-Stream mode, then you can use the function.

Here are eight options for VCA page [Region Entrance] [Region Exiting] [Advanced Motion Detection] [Tamper Detection] [Line Crossing] [Loitering] [Object Left/Removed] that you can select.

Step 1: Select detection region or line and enable the VCA event that you choose. Then set detecting sensitivity;

Step 2: Choose detection object. Check Human or Vehicle attribute, and the camera will alarm once detecting people or vehicle and triggering related events;

Note: All AI Cameras support this function.

Step 3: You can draw the interested area or click the Select All button [Select All] to select all area interested, and set object size limits;

Step 4: Draw the schedule and set alarm action. And then click [OK] or [Apply] after all set.

Step 5: Click [Copy] button to copy configuration to other channels.