3.2.2.4 Storage

Before you start:

To configure Record Settings, please make sure that you have the network storage device within the network or the SD card inserted in your camera. Choose the storage mode according to your needs.

[Storage Management]



SD Card Settings:

Table 1. Description of the buttons

Parameters

Function Introduction

Format

Format SD card, the files in SD card will be removed

NAS Settings:

The network disk should be available within the network and properly configured to store the recorded files, etc.

NAS (Network-Attached Storage), connecting the storage devices to the existing network, provides data and files services.

Table 2. Description of the buttons

Parameters

Function Introduction

Server Address

IP address of NAS server

Directory

Input the NAS file path, e.g. “\path”.

Mounting Type

NFS and SMB/CIFS are available. And you can set the user name and password to guarantee the security if SMB/CIFS is selected
Note: Up to 5 NAS disks can be connected to the camera.

[Record Settings]



Table 3. Description of the buttons

Parameters

Function Introduction

Enable Recycle Storage

Enable/Disable Recycle Storage, if you enable this option, it will delete the files when the free disk space reach a certain value.

Pre-record

Reserve the record time before alarm, 0~10 sec

Schedule

Click the Edit button to edit record schedule
Note: SD Card or NAS are available.

[Snapshot Settings]



Table 4. Description of the buttons

Parameters

Function Introduction

Enable Time Snapshot

Check the checkbox to enable the Timing Snapshot function

Interval

Set the snapshots interval, input the number and choose the unit(millisecond, second, minute, hour, day)

Save Into Storage

Save the snapshots into SD card or NAS

Upload Via FTP

Upload the snapshots via FTP

Upload Via Email

Upload the snapshots via Email
HTTP Post

Support to upload the snapshots to specified HTTP URL.

Note:
  • Three HTTP notifications at most can be added.
  • HTTP Notification supports Basic & Digest authentication.

Schedule

Click the Edit button to edit snapshot schedule