Privacy Mask

Milesight CMS supports privacy mask with up to 24 areas.

The meanings of the items on Privacy Mask page can be referred to the table below:

Table 1. Description of the buttons

Parameters	Function Introduction
Enable	Check the checkbox to enable the Privacy Mask function
Add	Add the current drawing area as Privacy Mask
Clear	Clear the current drawing area
Clear All	Clear all areas you drew before
Name	Support to customize the name of Privacy Mask
Type	Select the color for the privacy areas, there are eight colors available: White, Black, Blue, Yellow, Green, Brown, Red, Purple
Enable	Check the checkbox to enable or disable the corresponding area
Active Zoom Ratio	Set the value of Active Zoom Ratio according to your need, and then the mask will only appear when the zoom ratio is greater than the predefined value
Delete	Click to delete the selected area

The setting steps are shown as below:

Step1: Check the checkbox to enable the Privacy Mask function;

Step2: Hold the mouse to draw the privacy area and click [Add] button to add the area;

Step3: You can edit the added area information including Name, Type and Active Zoom Ratio;

Step4: Click [Apply] button to apply settings;

Step5: Click the [Clear] button to clear drawn area, while click the [Delete All] button to delete all added area.