Motion Detection

Different from traditional motion detection, Milesight Advanced Motion Detection can filter out “noise” such as lighting changes, natural tree movements, etc. When an object moves in the selected area, it will trigger alarm.

Step1: Select the camera and enable Advanced Motion Detection function;

Step2: Set detecting sensitivity;

Step3: Set up the Detection Object. Check Human or Vehicle attribute, and the camera will alarm and trigger related events once people or vehicle is detected;

Step4: Set Effective Region Mode. If you choose Normal, it supports configuring the Detection region for the current area. If you choose Advanced (Only for PTZ series), it supports configuring the detection region for different PTZ presets (Only support Preset 1~4 so far);

Step5: Draw the detection region.

Step6: Set Object Size Limit.

• Minimum Size: Draw the screen or input pixel number to set the minimum size of the

detected object. When the object is smaller than this size, it will not be detected.

The default minimum size is 3*3.

• Maximum Size: Draw the screen or input pixel number to set the maximum size of the

detected object. When the object is larger than this size, it will not be detected.

The default maximum size is 320*240.

Step7: Set detection schedule, then click to send the settings to camera to apply.