2.2 Configuration Flow
The configuration flow of Entrance&Exit Management Camera is shown in the following figure.
More configuration details are shown in the following table.
| Configuration | Description | Reference |
|---|---|---|
| Network Connection | Connect the network camera. You can set the camera over the LAN or dynamic IP connection. | |
| Accessing the Network Camera | Accessing from IP address, web browser and Milesight back-end software are available. | |
| Configure Basic Parameters | After login the camera, you can adjust the video/image/audio/network parameters as needed. | |
| Configure Advanced Functions | Configure LPR-related settings and other advanced functions. |