Preface

Copyright Statement

This guide may not be reproduced in any form or by any means to create any derivative such as translation, transformation, or adaptation without the prior written permission of Xiamen Milesight IoT Co., Ltd (Hereinafter referred to as Milesight).

reserves the right to change this guide and the specifications without prior notice. The latest specifications and user documentation for all Milesight products are available on our official website http://www.milesight.com

Safety Instruction

These instructions are intended to ensure that users can use the product correctly to avoid danger or property loss. Milesight will not take responsibility for any loss or damage resulting from failure to follow the instructions in this operating guide.

Warning: Serious injury or death may be caused if any of these warnings is neglected.
  • This installation must be conducted by a qualified service person and should strictly comply with the electrical safety regulations of the local region.
  • To avoid the risk of fire and electric shock, keep the product away from rain and moisture before installation.
  • The bottom of the device becomes extremely hot during operation. Do not touch it !
  • Do not power the device or connect it to other electrical devices during installation.
  • Do not connect or power the device using damaged cables.
  • Make sure the plug is firmly inserted into the power socket.
  • Make sure the device is firmly fixed when installing.
CAUTION: Injury or equipment damage may be caused if any of these cautions are neglected.
  • The device is intended only for indoor use.
  • The device must not be disassembled or remodeled in any way.
  • Do not place the device close to objects with naked flames.
  • Do not place the device where the temperature is below/above the operating range.
  • Do not drop the device or subject it to physical shock.
  • To prevent heat accumulation, do not block air circulation around the device.

Revision History

Release Date Version Description
Jan. 16, 2026 V1.0 Initial version
March 31, 2026 V1.1
  1. Adjust the layouts and names for LoRaWAN features under Data Acquisition and tabs under Interface menus.
  2. The minimum collection interval for Modbus and BACnet objects is adjusted to 1s.
  3. Merge global objects into Metadata of HTTP/MQTT data forwarding rules, and remove the Device page from Object configuration page.
  4. Update layout for MQTT forwarding configuration page.
  5. Add wildcards for MQTT Uplink Data topics.
  6. HTTPS access is enabled by default, and HTTP access is disabled.
  7. The password change prompt will pop up when login the web GUI for the first time.
  8. Web password must contain at least one letter and one number.
  9. Add Force HTTPS Redirection option.
  10. Equips with docker.