Downlink Commands for Network Parameters
This section describes the downlink commands for network settings.
Configure Communication Parameters
Command description:
| Item | Byte | Command | Value | Example |
|---|---|---|---|---|
| Reporting Interval | 1+4 | 66 | Byte 1-2:
0001 Byte 3-4: Interval time, range: 1-1440, unit: minute, default: 10 |
Reporting interval is 15 minutes: 6600010f00 |
| Reset Bluetooth Name | 2 | b400 | - | - |
| Keep Bluetooth Advertising | 2+1 | 9000 | 00=Disable, 01=Enable (default) | Disable: 900000 |
| Bluetooth Advertising Duration | 2+1 | 9001 | UINT8, Range: 1-10, Default: 1, Unit: min | The duration is 10 mins: 90010a |
| Cancel Bluetooth Pairing | 2 | b401 | - | - |
| Bluetooth Name (First 8B) | 2+8 | cd05 | ASCii to Hex strings (8B) | Name is
Room1: cd05526f6f6d31000000 |
| Bluetooth Name (Last 5B) | 2+5 | cd06 | ASCii to Hex strings (5B) |
Rejoin the Network
Command description:
| Item | Byte | Command | Value |
|---|---|---|---|
| Rejoin the Network | 1 | b6 | - |
Configure D2D Parameters
Command description:
| Item | Byte | Command | Value | Example |
|---|---|---|---|---|
| D2D Agent | 1+1 | 97 | 00=Disable (default), 01=Enable | Enable: 9701 |
| D2D Agent Rule | 2+4 | 98 + ID (00-07) | Byte 1: 00=Disable
(default),
01=Enable Byte 2-3: Control Command |
Enable rule 1, control command is 0011, control action is inserting schedule 1: 980001110000 |