Monitoring Objects

The objects in this section are used by the BMS to monitor device identity, environmental measurements, HVAC operating status, and relay status.

Device Information

Object ID	Object Type	Range Value	Unit	Remark
ipso_version	CSV	6 characters	— (95)	Protocol version
hardware_version	CSV			—
firmware_version	CSV			—
tsl_version	CSV			—
sn	CSV	16 characters		Serial Number
lorawan_class.value	MSI	3=Class C		—

Environmental and Operating Status

Object ID	Object Type	Range Value	Unit	Remark
celsius_ambient_temperature	AI	-20-60	°C(62)	—
fahrenheit_ambient_temperature	AI	-4-140	°F(64)
humidity	AI	5-100	%r.h (29)
system_status	BV	0=Off, 1=On	— (95)
When control permission is Thermostat
current_temperature_control_mode.status_value	MSI	1=Standby, 2=Stage-1 heat, 3=Stage-2 heat, 4=Stage-3 heat, 5=Stage-4 heat, 6=EM heat, 7=Stage-1 cool, 8=Stage-2 cool, 9=Stage-5 heat, 10=Stage-3 cool	— (95)	—
fan_mode_setting.status_value	MSI	1=Standby, 2=On, 3=Low speed, 5=High speed	— (95)
curr_temperature_humidity_source_value	MSI	1=Embedded, 3=LoRa, 4=D2D	— (95)
When control permission is Remote Control
enabled_relay	CSV	1-22 characters	— (95)	—