Storage Management

Note: Before you start:

To configure record settings, please make sure that you have the network storage device within the network or the SD card inserted in your camera.
Choose the storage mode according to your needs.

Table 1. Description of the buttons
Parameters	Function Introduction
SD Card	Format: Format SD card, the files in SD card will be removed. Mount/UnMount: Mount/Dismount SD card. Delete: Enable cyclic storage, when the free disk space reach at a certain value, it will automatically delete the files at certain percentage according to your settings.
Nas	The network disk should be available within the network and properly configured to store the recorded files, etc. NAS (Network-Attached Storage), connecting the storage devices to the existing network, provides data and files services. Server Address: IP address of NAS server. Directory: Input the NAS directory, e.g. “\path”. Mounting Type: NFS and SMB/CIFS are available. And you can set the user name and password to guarantee the security if SMB/CIFS is selected. Note: Up to 5 NAS disks can be connected to the camera. For more details about how to use NAS on Milesight Network Camera, please refer to https://milesight.freshdesk.com/a/solutions/articles/69000797902.