3.1.2 Login
Step1: Select Language on the top-right of interface.
Step2: Input the user name, password and click "Login" button to log in to NVR web page.
- If the NVR firmware version is below xx.7.0.6, the default user name is “admin” and the default password is “123456”.
- If the NVR firmware version is between xx.7.0.6 and xx.9.0.3, the default user name is “admin” and the default password is “ms1234”.
- If the NVR firmware version is xx.9.0.3 or above, please set the password before login.
- The account will be locked if the password is entered incorrectly for four times.
- If you forget the password, click
to reset
password (Only the NVR firmware version xx.9.0.3 or above supports this.).
Step3: The NVR Web page can be used with the most standard operating systems and browsers.
If the NVR version is V7x.9.0.4 or above, Plugin-Free Mode is supported on the NVR. You can preview the video on the browser without plugin. For Windows system, Plugin-Free mode is supported in Chrome/Firefox/Microsoft Edge browser. For MAC system, Plugin-Free mode is supported in Chrome/Firefox/Safari browser.
- If the firmware version of NVR is below V7x.9.0.14, only H.264 video codec is supported on Plugin-Free Mode for NVR. For better user experience, we recommend that you set the "profile" option to "main" on the camera.
- If the firmware version of NVR is V7x.9.0.14 or above, H.265 video codec is supported on Plugin-Free Mode for NVR.
- Plugin-Free mode is only supported when Chrome version is above V45, Firefox version is above V52, Microsoft Edge version is above V11 and Safari version is above V11.
- When you use plugin-free mode, it will display “Plugin-Free” mode in “Settings”
- “Local Configuration” interface.
If the NVR version is below V7x.9.0.4, the browser will prompt to install the plugin
when first logging in the device. You can click “
” to
download the plugin for NVR. Please click “Finish” and refresh the browser, then you
will see the video.
