Downlink Commands for Thermostat Parameters

This section describes the supported control objects when control permission is Thermostat.

Configure Installation Parameters

Object Name	Object Type	Default Value	Range Value	Unit	Remark
Reversing Valve (Value)	MSV	2	1=Energize on heat, 2=Energize on cool	-

Configure Temperature Control Basic Parameters

Object Name	Object Type	Default Value	Range Value	Unit	Remark
Temperature Control Enable Setting (Value)	MSV	1	1=Heat/EM Heat/Cool/Auto, 2=Heat/Cool/Auto, 3=Heat, 4=Cool, 5=Heat/Cool	-	Temperature Control Mode Enable
Temperature Control Mode (Value)	MSV	1	1=Heat, 2=EM Heat, 3=Cool, 4=Auto	-

Configure Occupancy Mode Parameters

Object Name	Object Type	Default Value	Range Value	Unit	Remark
Occupied Mode (Value)	MSO	1	1=Off, 2=Occupied, 3=Unoccupied	-	Occupancy Mode
Occupied Delay (Value)	MSV	1	1=disable, 2=5, 3=10, 4=20, 5=30, 6=40, 7=50, 8=60	min (72)
Celsius Target Deadband	AV	5	1 ~ 10	°C (62)
Fahrenheit Target Deadband	AV	9	1.8 ~ 18	℉(64)
Occupancy Mode is Occupied
Celsius Occupied Cooling Setpoint	AV	28	5 ~ 35	°C (62)
Fahrenheit Occupied Cooling Setpoint	AV	82	41 ~ 95	℉(64)
Celsius Occupied Cooling Setpoint Tolerance	AV	1	0.1 ~ 5	K (121)
Fahrenheit Occupied Cooling Setpoint Tolerance	AV	1.8	0.2 ~ 9	ΔT°F (120)
Celsius Occupied Heating Setpoint	AV	17	5 ~ 35	°C (62)
Fahrenheit Occupied Heating Setpoint	AV	62	41 ~ 95	℉(64)
Celsius Occupied Heating Setpoint Tolerance	AV	1	0.1 ~ 5	K (121)
Fahrenheit Occupied Heating Setpoint Tolerance	AV	1.8	0.2 ~ 9	ΔT°F(120)
Occupancy Mode is Unoccupied
Celsius Unoccupied Cooling Setpoint	AV	30	5 ~ 35	°C (62)
Fahrenheit Unoccupied Cooling Setpoint	AV	85	41 ~ 95	℉(64)
Celsius Unoccupied Cooling Setpoint Tolerance	AV	2	0.1 ~ 5	K (121)
Fahrenheit Unoccupied Cooling Setpoint Tolerance	AV	3.6	0.2 ~ 9	ΔT°F(120)
Celsius Unoccupied Heating Setpoint	AV	15	5 ~ 35	°C (62)
Fahrenheit Unoccupied Heating Setpoint	AV	59	41 ~ 95	℉(64)
Celsius Unoccupied Heating Setpoint Tolerance	AV	2	0.1 ~ 5	K (121)
Fahrenheit Unoccupied Heating Setpoint Tolerance	AV	3.6	0.2 ~ 9	ΔT°F(120)
Target Temperature Regulation Range = Set point +/ Adjust Tolerance
Celsius Cooling Setpoint	AV	29	5 ~ 35	°C (62)
Fahrenheit Cooling Setpoint	AV	84.2	41 ~ 95	℉(64)
Celsius Heating Setpoint	AV	14.5	5 ~ 35	°C (62)
Fahrenheit Heating Setpoint	AV	58	41 ~ 95	℉(64)
Celsius Cooling Adjust Tolerance	AV	6	0.5 ~ 16	K (121)
Fahrenheit Cooling Adjust Tolerance	AV	10.8	0.5 ~ 30	ΔT°F (120)
Celsius Heating Adjust Tolerance	AV	4.5	0.5 ~ 16	K (121)
Fahrenheit Heating Adjust Tolerance	AV	8	0.5 ~ 30	ΔT°F (120)

Configure Fan Mode Parameters

Object Name	Object Type	Default Value	Range Value	Unit	Remark
Fan Control Mode (Value)	MSV	2	2=Auto, 3=Always on, 4=Circulate	-	Fan Mode
Fan Delay Config Enable	BV	0	0=Disable, 1=Enable	-
Fan Delay Config Delay Time	AV	60	1-3600	s (73)

Temperature Control Stage Switch

Object Name	Object Type	Default Value	Range Value	Unit	Remark
Celsius Temperature Control Delta 1	AV	3	1-10	°C (62)
Fahrenheit Temperature Control Delta 1	AV	5.4	1.8 ~ 18	℉(64)
Celsius Temperature Control Delta 2	AV	5	1 ~ 10	°C (62)
Fahrenheit Temperature Control Delta 2	AV	9	1.8 ~ 18	℉(64)