Downlink Commands for Auxiliary Features

This section describes the downlink commands for the auxiliary features.

Configure General Parameters

Name Example
reboot Reboot the device.
{
  "reboot": "yes"
}
temperature_unit Set the temperature unit as °F.
{
  "temperature_unit": 1  //0: °C (default), 1: °F
}
temperature_data_source Set the temperature data source as External.
{
  "temperature_data_source": {
    "source": 0  //0: External, 4: Built-in (default)
  }
}
enhanced_infrared_emission_power_enable Enable the enhanced IR emission.
{
  "enhanced_infrared_emission_power_enable": 1  //0: Disable (default), 1: Enable
}
battery_enable Enable the battery compartment.
{
  "battery_enable": 1  //0: Disable (default), 1: Enable
}
dormant_settings Enable sleep duration time 1.
{
  "dormant_settings": [
    {
      "id": 0,  //Time ID, range: 0-1
      "enable": 1  //0: Disable (default), 1: Enable
    }
  ]
}
Duration time 1 is 1.1 to 12.31.
{
  "dormant_settings": [
    {
      "id": 0,  //Time ID, range: 0-1
      "heating_date_settings": {
        "start_mon": 1,  //Range: 1-12
        "start_day": 1,  //Range: 1-31
        "end_mon": 12,  //Range: 1-12
        "end_day": 31  //Range: 1-31
      }
    }
  ]
}
air_power_settings AC cooling power is 1000 W.
{
  "air_power_settings": {
    "refrigeration_power": 1000  //Unit: W, range: 0-60000, 0: blank
  }
}
AC heating power is 1000 W.
{
  "air_power_settings": {
    "heating_power": 1000  //Unit: W, range: 0-60000, 0: blank
  }
}
indicator_light_disable_settings Enable the indicator Auto-off, and the time is 10 minutes.
{
  "indicator_light_disable_settings": {
    "enable": 1,  //0: Disable, 1: Enable (default)
    "time": 600  //Unit: s, Range: 600-3600, Default: 600
  }
}
data_storage_settings Enable data storage.
{
  "data_storage_settings": {
    "enable": 1  //0: Disable, 1: Enable
  }
}
Enable data retransmission.
{
  "data_storage_settings": {
    "retransmission_enable": 1  //0: Disable, 1: Enable
  }
}
The retransmission interval is 1200s.
{
  "data_storage_settings": {
    "retransmission_interval": 1200  //Unit: s, range: 30-1200, default: 600
  }
}
clear_historical_data Clear the historical data.
{
  "clear_historical_data": "yes"
}

Configure Time Parameters

Name Example
time_zone Set the time zone as UTC-4.
{
  "time_zone": -240  //Unit: min, INT16/60
}
daylight_saving_time Enable DST, start time is October 1st Sunday 2:00, end time is April 1st Sunday 2:00, bias is 60 minutes.
{
  "daylight_saving_time": {
    "enable": 1,  //0: Disable (default), 1: Enable
    "daylight_saving_time_offset": 60,  //Unit: min, range: 1-120
    "start_month": 10,  //Range: 1-12
    "start_week_num": 1,  //Range: 1-5
    "start_week_day": 7,  //Range: 1-7
    "start_hour_min": 120,  //Unit: min, range: 0-1439
    "end_month": 4,  //Range: 1-12
    "end_week_num": 1,  //Range: 1-5
    "end_week_day": 7,  //Range: 1-7
    "end_hour_min": 120  //Unit: min, range: 0-1439
  }
}
synchronize_time Sync time from LNS.
{
  "synchronize_time": "yes"
}

Configure Sensor Parameters

Name Example
internal_sensor_settings Built-in sensor name is sensor.
{
  "internal_sensor_settings": {
    "name1": "sensor",  //First 6 charaters
    "name2": "",  //Middle 6 charaters
    "name3": ""  //Last 6 charaters
  }
}
Built-in sensor temperature calibration value is 1 °C.
{
  "internal_sensor_settings": {
    "temp_calibration": 1  //Unit: °C, range: -80-80
  }
}
Built-in sensor humidity calibration value is -0.3%RH.
{
  "internal_sensor_settings": {
    "humi_calibration": -0.3  //Unit: %RH, range: -100-100
  }
}
Temp & humidity sampling interval is 3600s.
{
  "internal_sensor_settings": {
    "collect_period": 3600  //Unit: s, range: 30-3600, default: 30
  }
}
external_sensor_settings External sensor name is sensor.
{
  "external_sensor_settings": {
    "name1": "sensor",  //First 6 charaters
    "name2": "",  //Middle 6 charaters
    "name3": ""  //Last 6 charaters
  }
}
Enable the external sensor.
{
  "external_sensor_settings": {
    "enable": 1  //0: Disable, 1: Enable (default)
  }
}
External sensor temperature calibration value is 1 °C.
{
  "external_sensor_settings": {
    "temp_calibration": 1  //Unit: °C, range: -80-80
  }
}
ct_sensor_settings Enable the external CT.
{
  "ct_sensor_settings": {
    "connected": 1  //0: Disconnected (default), 1: Connected
  }
}
External CT sampling interval is 128s.
{
  "ct_sensor_settings": {
    "collect_period": 128  //Unit: s, range: 1-128, default: 5
  }
}
External CT threshold is 30mA.
{
  "ct_sensor_settings": {
    "collect_threshold": 30  //Unit: mA, range: 30-1000
  }
}
AC type is wall-mounted.
{
  "ct_sensor_settings": {
    "ac_type": 0  //0: Wall-mounted (default), 1: Standing Cabinet, 2: Ceiling-mounted
  }
}

Configure Threshold Parameters

Name Example
continuous_high_temp_alarm_settings Enable the persistent high temperature alarm.
{
  "continuous_high_temp_alarm_settings": {
    "enable": 1  //0: Disable (default), 1: Enable
  }
}
Difference is 3.15 °C.
{
  "continuous_high_temp_alarm_settings": {
    "difference": 3.15  //Unit: °C, range: 1-10, default: 3
  }
}
Duration is 5 mins.
{
  "continuous_high_temp_alarm_settings": {
    "duration": 5  //Unit: min, range: 0-60, default: 5
  }
}
continuous_low_temp_alarm_settings Enable the persistent low temperature alarm.
{
  "continuous_low_temp_alarm_settings": {
    "enable": 1  //0: Disable (default), 1: Enable
  }
}
Difference is 3.15 °C.
{
  "continuous_low_temp_alarm_settings": {
    "difference": 3.15  //Unit: °C, range: 1-10, default: 3
  }
}
Duration is 5 mins.
{
  "continuous_low_temp_alarm_settings": {
    "duration": 5  //Unit: min, range: 0-60, default: 5
  }
}
temperature_alarm_settings Enable the temperature threshold.
{
  "temperature_alarm_settings": {
    "enable": 1  //0: Disable (default), 1: Enable
  }
}
Condition is below threshold.
{
  "temperature_alarm_settings": {
    "threshold_condition": 1  //0: Disable, 1: Below, 2: Above, 4: Below or Above
  }
}
Below threshold is -5.15 °C.
{
  "temperature_alarm_settings": {
    "threshold_min": -5.15  //Unit: °C, range: -20-60, default: -20
  }
}
Above threshold is 25.15 °C.
{
  "temperature_alarm_settings": {
    "threshold_max": 25.15  //Unit: °C, range: -20-60, default: 60
  }
}