Downlink Commands for Network Parameters

This section describes the downlink commands for network settings.

Configure Communication Parameters

Name Example
reporting_interval Set the reporting interval as 15 minutes.
{
  "reporting_interval": {
    "ble_lora": {
      "unit": 1,
      "minutes_of_time": 15  //Unit: min, range: 1-1440, default: 10
    }
  }
}
ble_server Reset the Bluetooth name.
{
  "ble_server": {
    "type": 0  //0: Reset BLE Name, 1: Cancel Pairing
  }
}
Cancel the Bluetooth pairing.
{
  "ble_server": {
    "type": 1  //0: Reset BLE Name, 1: Cancel Pairing
  }
}
ble_adv_time_settings Disable Bluetooth advertising, and set the Bluetooth advertising duration as 10 minutes..
{
  "ble_adv_time_settings": {
    "enable": 0  //0: Disable, 1: Enable (default)
    "duration": 10  //Unit: min, range: 1-10, default: 1
  }
}
ble_configuration_settings Bluetooth name is schoolroom:
{
  "ble_configuration_settings": {
    "local_name_first": "schoolro",   //Max 8 characters
    "local_name_last": "om"     //Max 5 characters
  }
}

Rejoin the Network

Name Example
reconnect Rejoin the network.
{
  "reconnect": "yes"
}

Configure D2D Parameters

Name Example
d2d_slave_enable Enable the D2D agent.
{
  "d2d_slave_enable": 1  //0: disable (default), 1: enable
}
d2d_slave_settings Enable rule 1. The control command is 0011 and the control action is inserting schedule 1.
{
  "d2d_slave_settings": [
    {
      "index": 0,  //Rule ID, range: 0-15
      "enable": 1,  //0: disable, 1: enable
      "command": "0011",  //Hex control command
      "value": 0  //0-15: Schedule 1-16, 16: System Off, 17: System On, 18: System Inverse
    }
  ]
}