User Guide
- About this Guide
  This guide provides instructions for setting up, deploying, configuring, operating, and maintaining the SG50 gateway.
- Product Introduction
  - Overview
  - Packing List
  - Hardware Introduction
    This chapter describes the hardware design of the device.
- First Start
  This chapter describes the required steps to complete the basic setup, and verify that the gateway is ready for deployment.
- Hardware Installation
  This chapter describes the preparation and installation procedures for mounting the gateway and its accessories at the deployment site.
- Power Management
  This chapter describes how the SG50 uses external power, the solar panel, and the internal battery, and provides battery and solar panel maintenance information.
- Web GUI Configuration
- Services
MQTT and HTTP Application Guide

Packing List

After unboxing, please check the package contents against the following list to ensure all items are included. If any of the below items are missing or damaged, please contact your sales representative.



1 × SG50 Gateway	1 × Battery Pack	1 × SIM Card Ejector Tool

1 × LoRaWAN^® Antenna (60cm)	1 × Antenna Coaxial Cable (1m)	1 × Antenna U-strap Kit

1 × Antenna U-bolt Clamp Kit	1 × Solar Panel (with 50cm M12 Power Cable)	1 × Solar Panel Bracket Kit

4 × Mounting Screws	1 × Mounting Bracket Kit	2 × Hose Clamps (⌀ 67-127mm)

4 × Wall Mount Screw Sets	1 × Warranty Card	1 × Quick Guide Card