Preface

Copyright Statement

This guide may not be reproduced in any form or by any means to create any derivative such as translation, transformation, or adaptation without the prior written permission of Xiamen Milesight IoT Co., Ltd (Hereinafter referred to as Milesight).

reserves the right to change this guide and the specifications without prior notice. The latest specifications and user documentation for all Milesight products are available on our official website http://www.milesight.com

Safety Instruction

These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. Milesight will not shoulder responsibility for any loss or damage resulting from not following the instructions of this operating guide.
Warning: Serious injury or death may be caused if any of these warnings is neglected.
  • To avoid risk of fire and electric shock, do keep the product away from rain and moisture before installation.
  • Do not touch components which may be hot.
  • Make sure the plug is firmly inserted into the power socket.
  • Make sure the device is firmly fixed when installing.
  • The device must not be disassembled or remodeled in any way.
CAUTION: Injury or equipment damage may be caused if any of these cautions are neglected.
  • Do not place the device where the temperature is below/above the operating range.
  • The device must never be subjected to shocks or impacts.
  • Do not expose the device to where a laser beam equipment is used.
  • To prevent heat accumulation, do not block air circulation around the device.
  • Do not use volatile solvents such as alcohol, benzene or thinners as they may damage the surface finishes.

Revision History

Release Date Version Revision Content
January 22, 2025 V1.0 Initial version
September 26, 2025 V1.1
  1. Add Lying Alarm.
  2. Added Breathing Detection.
  3. Introduced AI Fall Alarm Filtering.
  4. Added Digital Output alarm.
  5. Added Ignore sub-region.
  6. Added support for data transmission via WiFi STA mode.
  7. Supports multi-person fall alarms (for special scenarios).
  8. Supports out-of-bed alarms for multi person.
  9. Sub-region limit increased from 4 to 6.
  10. Optimized interface: separated room settings and detection configuration, improved sub-region layout, enhanced information page, and merged LoRa and D2D pages.