Preface
Copyright Statement
This guide may not be reproduced in any form or by any means to create any derivative such as translation, transformation, or adaptation without the prior written permission of Xiamen Milesight IoT Co., Ltd (Hereinafter referred to as Milesight).
reserves the right to change this guide and the specifications without prior notice.
The latest specifications and user documentation for all Milesight products are
available on our official website http://www.milesight.com
Safety Instruction
These instructions are intended to ensure that user can use the product correctly to
avoid danger or property loss. Milesight will not shoulder responsibility for any loss
or damage resulting from not following the instructions of this operating guide.
CAUTION: Injury or equipment damage may be caused if any
of these cautions are neglected.
-
The probe has a sharp point. Please be careful and keep the edges and points away from human body.
-
The device must not be disassembled or remodeled in any way.
- To ensure the security of your device, please change the device password during the initial configuration. The default password is 123456.
- Do not place the device close to objects with naked flames.
- Do not place the device where the temperature is below/above the operating range.
- Make sure electronic components do not drop out of the enclosure while opening.
- When installing the battery, please install it accurately, and do not install the inverse or wrong model.
- The device must never be subjected to shocks or impacts.
Revision History
| Release Date | Version | Description |
|---|---|---|
|
April 10, 2023 |
V1.0 | Initial version |
| Feb. 20, 2024 | V 1.1 | Add temperature calibration downlink command |