Uplink Data
This chapter describes the reported data of the device.
Basic Information
The device will report a basic information packet whenever joining the network.
| Item | Channel | Type | Byte | Description |
|---|---|---|---|---|
| Power On | ff | 0b | 1 | Device is on |
| Protocol Version | ff | 01 | 1 | Example: 01=V1 |
| Hardware Version | ff | 09 | 2 | Example: 03 10 = V3.1 |
| Software Version | ff | 0a | 2 | Example: 03 01 = V3.1 |
| Serial Number | ff | 16 | 8 | 16 digits |
| Overcurrent Alarm | ff | 24 | 2 |
Byte 1: 00-disabled, 01-enabled Byte 2: current threshold, unit: A |
|
Button Lock |
ff | 25 | 2 |
0000-disabled, 0080-enabled |
|
Power Consumption |
ff | 26 | 1 | 00-disabled, 01-enabled |
| Overcurrent Protection | ff | 30 | 2 |
Byte 1: 00-disabled, 01-enabled Byte 2: current threshold, unit: A |
- Example:
-
ff0bff ff0101ff166762d21130962038 ff090100 ff0a0108 ff240000 ff30010a ff250000 ff2601 Channel Type Value ff 0b ff ff 01 Protocol Version: 01=V1 ff 16 SN: 6762d21130962038 ff 09 Hardware Version: 0100=V1.0 ff 0a Software Version: 0108=V1.8 ff 24 Overcurrent Alarm: 00=disable, 00=0A ff 30 Overcurrent Protection:01=enable, 0a=10A ff 25 Button Lock: 00 00=disable ff 26 Power Consumption: 01=enable
Periodic Report
| Item | Channel | Type | Byte | Description |
|---|---|---|---|---|
| Voltage | 03 | 74 | 2 | UINT16/10, Unit: V |
| Active Power | 04 | 80 | 4 |
UINT32, Unit: W Note: When the device is
powered off, this parameter will be 0.
|
| Power Factor | 05 | 81 | 1 | UINT8, Unit: % |
| Power Consumption | 06 | 83 | 4 | UINT32, Unit: Wh |
| Total Current | 07 | c9 | 2 | UINT16, Unit: mA |
| Socket Status | 08 | 70 | 1 | 00: Close, 01: Open |
- Example:
- Report data according to reporting interval (20mins by default).
087001 058164 07c90200 0374b208 068301000000 048001000000 Channel Type Value 08 70 Socket status: 01 = Open 05 81 Power Factor: 64=> 100% 07 c9 Current: 02 00=>00 02=2mA 03 74 Voltage: b2 08=>08 b2=2226/10=222.6V 06 83 Power Consumption: 01 00 00 00=>00 00 00 01=1 Wh=0.001 kWh 04 80 Active Power: 01 00 00 00=>00 00 00 01=1 W
Socket Change Report
The device will report a socket status packet when the status changes.
| Channel | Type | Byte | Description |
|---|---|---|---|
| 08 | 70 | 1 |
00: Close by Command, 10: Close by button 01: Open by Command, 11: Open by button |
- Example:
-
087011 Channel Type Value 08 70 11 => Open by button
Power Outage Alert
The device is equipped with capacitor for power outage alert. It will report an alert
message when power supply is disconnected. This feature only works with hardware
version 1.2 and later.
| ff3fff | ||
|---|---|---|
| Channel | Type | Value |
| ff | 3f | ff: Reversed |