3.2.1.1 Channels
Channels management provides searching, adding, editing, and deleting channels function. As for searching and deleting channels, please refer to the Chapter III Device Management 3.1 Adding Device.
[Adding Channel]
You can add Milesight cameras searched by CMS automatically, and by adding manually, you can add third party cameras that have ONVIF and RTSP protocol.
- ONVIF: Camera which supports ONVIF protocol;
- RTSP:
- Primary: rtsp://IP:Port/main
- Secondary: rtsp://IP:Port/subNote: The default port for RTSP protocol is 554.
- MSSP is only for the Milesight products.
[Editing Channel]
You can edit the channel when adding it manually. Or you can edit it by click the
button
.
