3.2.1.3 Storage
1. Record
[Record Schedule]
Click the Schedule button, the setting window will pop up as below:
You can set channel recording schedules in “Record Schedule”, If you want the channels to record by schedule, you need to select one of the recording types and then set the time. You can click [Copy] to copy the settings to other channels. After setting the schedule for one channel or some channels, click the Apply button [Apply].
[General Settings]
Make general configuration for selected channels. Click [Copy] to copy the same configuration to other channels.
- Channel: Select the channel which will be set.
- Pre Record:Event pre-record duration time. It will start recording before the event is triggered. Note that NVR model ends with letter T doesn’t support pre-record.
- Post Record:Event post-record duration time. It will keep recording after the event is over.
- Audio Record: Select to record audio or not.
- Record Stream Type: Select Main stream or sub stream for record.
- Video Due Time: Set the due time of recording files, 1~120 days or unlimited are available.
- ANR: With this option enabled, when the connection between camera and NVR is lost, the camera would start continuous recording and store videos in SD card instead. Then after reconnection, NVR automatically retrieves missed continuous videos from camera SD card in a period of time to prevent data missing. And you can check the corresponding ANR recording directly in the playback interface.
2. Snapshot
[Snapshot Schedule]
Click the Schedule button, the setting window will pop up as below:
You can set channel snapshot schedules in “Snapshot Schedule”, If you want the channels to snapshot by schedule, you need to select one of the snapshot types and then set the time. You can click [Copy] to copy the settings to other channels. After setting the schedule for one channel or some channels, click the Apply button [Apply].
[General Settings]
Make general configuration for selected channels. Click [Copy] to copy the same configuration to other channels.
- Channel: Select the channel which will be set.
- Snapshot Interval: Set the snapshot Interval, 10~86400 seconds are available.
- Snapshot Due Time: Set the due time of snapshot files, 1~120 days or unlimit are available.
3. Disk Management
Click the Disk Management to manage the disk, as the window shows, you can check the disk status and format the disk. In addition, you can enable or disable Recycle Mode for the storage device.
