4.3.3.1 Settings
Step1: Click
to create a group, supports adding up to 9 groups;
Step2: Select cameras into the group;
Step3: Enable People Counting function and start editing:
Step4: About People Counting
Max. Stays: Enter the maximum number you want to stay in your monitoring area;
Counting Reset: Click the button to reset the data of Occupancy Live View and Statistics Report;
Live View Counting Reset: Click the button to reset the data of Occupancy Live View;
Live View Counting Auto Reset: The Live View Counting data will be reset automatically according to your configuration.
Step5: About Live View
Logo: select an image file and click the “Upload” button, the Logo will be displayed in Occupancy Live View;
Delete Logo: Click the button to delete the uploaded Logo;
Reset Logo: Click the button to reset the logo to Milesight logo;
Font Size: Small, medium and large fonts are available;
Reminders of Green/Red Light: You can configure your reminders in the box, and the content will be displayed in the Live View right below the traffic light. The reminders in small and medium fonts support up to 80 characters. The large font supports up to 25 characters.
Step6: About Alarm Action
When occupancy limits are breached, an audio alarm can be triggered if anyone attempts to enter before the numbers go below that threshold;
Play Audio: Check the box to play audio when Available number turns into zero. You can choose default audio or customized audio; (CMS side)
HTTP Notification: Support popping up the alarm news to specified HTTP URL. Three HTTP notifications at most can be added to the same event. HTTP Notification supports Basic & Digest authentication;
Camera External Output: You can choose to have the alarm constantly on or set to any number between 1-999 seconds;
Camera Audio: Check the box to play audio when available number turns into zero. (Camera side)