LoRaWAN Settings

This chapter describes the LoRaWAN® network settings of device.

Parameter Description
Device EUI Unique ID of the device which can be found on the device.
Note: please contact sales for device EUI list if you have many units.
App EUI The default App EUI (join EUI) is 24E124C0002A0001.
Application Port The port used for sending and receiving data, the default port is 85.
LoRaWAN® Version V1.0.2 and V1.0.3 are available.
Work Mode It's fixed as Class A.
Confirmed Mode

If the device does not receive ACK packet from network server, it will resend data once.
Join Type OTAA and ABP mode are available.
Note: it's necessary to select OTAA mode if connecting device to Milesight IoT Cloud or Milesight Development Platform.
Application Key Appkey for OTAA mode, default value: "Device EUI" + "Device EUI" (since Q4 of 2025). Example: 24e124123456789024e1241234567890
Note:
  • The default value of earlier devices is 5572404C696E6B4C6F52613230313823.
  • Please contact sales before purchase if you require random App Keys.
Network Session Key Nwkskey for ABP mode, the default is 5572404C696E6B4C6F52613230313823.
Application Session Key Appskey for ABP mode, the default is 5572404C696E6B4C6F52613230313823.
Device Address DevAddr for ABP mode, default is the 5th to 12th digits of SN.
Rejoin Mode

Reporting interval≤35 mins: the device will send a specific number of LinkCheckReq MAC packets to the network server every reporting interval or every double reporting interval to validate connectivity; If there is no response, the device will re-join the network.

Reporting interval > 35 mins: the device will send a specific number of LinkCheckReq MAC packets to the network server every reporting interval to validate connectivity; If there is no response, the device will re-join the network.
Note:
  1. Only OTAA mode supports rejoin mode.
  2. The actual sending number is Set the number of packets sent +1.
Supported Frequency Enable or disable the frequency to send uplinks. If frequency is one of CN470/AU915/US915, enter the index of the channel to enable in the input box, making them separated by commas.

Examples:

1, 40: Enabling Channel 1 and Channel 40

1-40: Enabling Channel 1 to Channel 40

1-40, 60: Enabling Channel 1 to Channel 40 and Channel 60

All: Enabling all channels

Null: Indicate that all channels are disabled
ADR Mode Enable or disable network server to adjust Spreading Factor, Bandwidth an Tx Power to optimize data rates, airtime and energy consumption in the network.
Spreading Factor If ADR mode is disabled, the device will send uplink data following this SF parameter. The higher the spreading factor, the longer the transmission distance, the slower the transmission speed and the more the consumption.
Tx Power Tx power (transmit power) refers to the strength of the outgoing signal transmitted by the device. This is defined by LoRa alliance.
RX2 Data Rate RX2 data rate to receive downlinks.
RX2 Frequency RX2 frequency to receive downlinks. Unit: Hz