Preface

Copyright Statement

This guide may not be reproduced in any form or by any means to create any derivative such as translation, transformation, or adaptation without the prior written permission of Xiamen Milesight IoT Co., Ltd (Hereinafter referred to as Milesight).

reserves the right to change this guide and the specifications without prior notice. The latest specifications and user documentation for all Milesight products are available on our official website http://www.milesight.com

Safety Instruction

Milesight will not shoulder responsibility for any loss or damage resulting from not following the instructions of this operating guide.
Warning: Serious injury or death may be caused if any of these warnings is neglected.
  • This installation must be conducted by a qualified service person and should strictly comply with the electrical safety regulations of the local region.
  • To avoid risk of fire and electric shock, do keep the product away from rain and moisture before installation.
  • Do not touch components which may be hot.
  • Make sure the plug is firmly inserted into the power socket.
  • Make sure the device is firmly fixed when installing.
CAUTION: Injury or equipment damage may be caused if any of these cautions are neglected.
  • The device must not be disassembled or remodeled in any way.
  • Do not place the device where the temperature is below/above the operating range.
  • The device must never be subjected to shocks or impacts.
  • Do not expose the device to where a laser beam equipment is used.
  • To prevent heat accumulation, do not block air circulation around the device.
  • Use a soft, dry cloth to clean the lens of the device. Stubborn stains can be removed using a cloth dampened with a small quantity of detergent solution, then wipe them dry.
  • Do not use volatile solvents such as alcohol, benzene or thinners as they may damage the surface finishes.

Revision History

Date Doc Version Description
Apr. 26, 2021 V 1.0 Initial version
Jan. 18, 2022 V 1.1
  1. Support line crossing counting feature;
  2. Support D2D feature;
  3. Support people counting debounce;
  4. Support uploading max number of people;
  5. Support downlink control.
Apr. 8, 2022 V 1.2
  1. Milesight LOGO update;
  2. Support recognition scheme selection.
June 20, 2022 V 1.3
  1. Update web GUI menu;
  2. Support customize people counting detection area to 16 regions;
  3. Add recommended installation guide and line drawing note.
Dec. 14, 2022 V 1.4
  1. Support per region people counting uplinks
  2. Add private mask feature
  3. Add LoRaWAN single channel mode
  4. Add Wi-Fi SSID broadcast option
  5. Delete Auto Reboot and LoRaWAN V1.1.0 option
  6. Support live view blur process and delete Image Config
Mar. 9, 2023 V1.5
  1. Add privacy mode under activation page
  2. Support filter U-turns feature
Apr. 20, 2023 V1.6 Add installation height of high ceiling mount version
July 15, 2023 V1.7
  1. Add people flow analysis feature;
  2. Reporting interval range is extended to 5~86400s;
  3. Add report interval downlink control command;
  4. Add rejoin 9~16 people uplink definition.
  5. Adjust illuminance of region people counting.
Apr. 8, 2024 V1.8
  1. Support region dwell time detection;
  2. Support to report data with timestamp;
  3. Support data retransmission feature;
  4. Support time sync with Milesight gateway.
Jul.30 V1.9
  1. Add configuration of Wi-Fi passwords at login, user passwords are required to contain 4 styles.
  2. Add Log Management.
  3. Support to configure TX Power.
  4. Support Trigger Report.
  5. Add Detection Persistence Time Setting.
  6. Privacy mode switching is available on the web page.
  7. Add Schedule Setting.
  8. Add 5 timestamps to reset cumulative data.
  9. Add downlink commands.
  10. D2D supports for region association and test mode.