Preface

Copyright Statement

This guide may not be reproduced in any form or by any means to create any derivative such as translation, transformation, or adaptation without the prior written permission of Xiamen Milesight IoT Co., Ltd (Hereinafter referred to as Milesight).

reserves the right to change this guide and the specifications without prior notice. The latest specifications and user documentation for all Milesight products are available on our official website http://www.milesight.com

Safety Instruction

Milesight will not shoulder responsibility for any loss or damage resulting from not following the instructions of this operating guide.
Warning: Serious injury or death may be caused if any of these warnings is neglected.
  • This installation must be conducted by a qualified service person and should strictly comply with the electrical safety regulations of the local region.
  • To avoid risk of fire and electric shock, do keep the product away from rain and moisture before installation.
  • Do not touch components which may be hot.
  • Make sure the plug is firmly inserted into the power socket.
  • Make sure the device is firmly fixed when installing.
  • The device must not be disassembled or remodeled in any way.
CAUTION: Injury or equipment damage may be caused if any of these cautions are neglected.
  • Do not place the device where the temperature is below/above the operating range.
  • The device must never be subjected to shocks or impacts.
  • Do not expose the device to where a laser beam equipment is used.
  • To prevent heat accumulation, do not block air circulation around the device.
  • Use a soft, dry cloth to clean the lens of the device. Stubborn stains can be removed using a cloth dampened with a small quantity of detergent solution, then wipe them dry.
  • Do not use volatile solvents such as alcohol, benzene or thinners as they may damage the surface finishes.

Revision History

Data Doc Version Description
Feb. 23, 2024 V1.0 Initial version
May 20, 2024 V1.1
  1. Support to configure WLAN IP address;
  2. Add ToF lighting mode and noise filtering;
  3. Add validation record task list;
  4. Add Enhanced Detection Mode;
  5. Update installation distance.
Jul.30, 2024 V1.2
  1. Add Multi-Device Stitching;
  2. Add detection line list;
  3. Add People Counting Trigger Report.
Feb. 12, 2025 V1.3
  1. Add configuration of Wi-Fi passwords at login, user passwords are required to contain 4 styles.
  2. Add Obstacle Exclusion.
  3. Add Occlusion Detection.
  4. Add Heatmap.
  5. Add reporting on the dot.
  6. Support time synchronization with the LoRaWAN® network server.
  7. Support Individual Filter of Group Counting.
  8. Add LED indicator switch and diagnostic function for support.
  9. Support for downloading logs and Ping detection.
  10. Support separate reporting of children's data.
May 28, 2025 V1.4
  1. Add automatic U-turn filtering.
  2. Add Record Track Start/Stop Points and show Static Track Line.
  3. Add Log Mode - File to choose the level of the download log files.
  4. Add downlink commands.
  5. Support to configure TX Power.
  6. Add Data Retransmission and Retrievability.
  7. Modify the display style of real-time track line and preview layout.
  8. Remove Ping detection.