Preface

Copyright Statement

This guide may not be reproduced in any form or by any means to create any derivative such as translation, transformation, or adaptation without the prior written permission of Xiamen Milesight IoT Co., Ltd (Hereinafter referred to as Milesight).

reserves the right to change this guide and the specifications without prior notice. The latest specifications and user documentation for all Milesight products are available on our official website http://www.milesight.com

Safety Instruction

These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. Milesight will not shoulder responsibility for any loss or damage resulting from not following the instructions of this operating guide.
CAUTION: Injury or equipment damage may be caused if any of these cautions are neglected.
  • The device must not be disassembled or remodeled in any way.
  • In order to protect the security of the device, please change device password when first configuration. The default password is 123456.
  • Do not place the device outdoors where the temperature is below/above operating range. Do not place the device close to objects with naked flames, heat source (oven or sunlight), cold source, liquid and extreme temperature changes.
  • The device is not intended to be used as a reference sensor, and Milesight will not should responsibility for any damage which may result from inaccurate readings.
  • The batteries should be removed from the device if it is not to be used for an extended period. Otherwise, the batteries might leak and damage the device. Never leave discharged batteries in the battery compartment.
  • The device must never be subjected to shocks or impacts.
  • Do not clean the device with detergents or solvents such as benzene or alcohol. To clean the device, wipe with a soft moistened cloth. Use another soft, dry cloth to wipe dry.

Revision History

Release Date Version Description
Jan. 20, 2022 V1.0 Initial version
Feb. 15, 2023 V1.1
  1. Add single channel mode
  2. Add data storage and retransmission feature
  3. Add hibernate feature and support to disable/enable last update time
Dec. 29, 2023 V1.2
  1. Add CO2 altitude compensation
  2. Add downlink command to configure screen content
  3. Support power button to update data
Nov. 20, 2025 V1.3 Battery pre-installed in the device and removed from packing list.