Preface

Copyright Statement

This guide may not be reproduced in any form or by any means to create any derivative such as translation, transformation, or adaptation without the prior written permission of Xiamen Milesight IoT Co., Ltd (Hereinafter referred to as Milesight).

reserves the right to change this guide and the specifications without prior notice. The latest specifications and user documentation for all Milesight products are available on our official website http://www.milesight.com

Safety Instruction

Milesight will not shoulder responsibility for any loss or damage resulting from not following the instructions of this operating guide.
Warning: Serious injury or death may be caused if any of these warnings is neglected.
  • This installation must be conducted by a qualified service person and should strictly comply with the electrical safety regulations of the local region.
  • To avoid risk of fire and electric shock, do keep the product away from rain and moisture before installation.
  • Do not touch components which may be hot.
  • Make sure the plug is firmly inserted into the power socket.
  • Make sure the device is firmly fixed when installing.
CAUTION: Injury or equipment damage may be caused if any of these cautions are neglected.
  • The device must not be disassembled or remodeled in any way.
  • Do not place the device where the temperature is below/above the operating range.
  • The device must never be subjected to shocks or impacts.
  • Do not expose the device to where a laser beam equipment is used.
  • To prevent heat accumulation, do not block air circulation around the device.
  • Use a soft, dry cloth to clean the lens of the device. Stubborn stains can be removed using a cloth dampened with a small quantity of detergent solution, then wipe them dry.
  • Do not use volatile solvents such as alcohol, benzene or thinners as they may damage the surface finishes.

Revision History

Date Doc Version Description
March 15, 2023 V 1.0 Initial version
April 20, 2023 V 1.1 Add installation height of high ceiling mount version
July 15, 2023 V 1.2
  1. Add people flow analysis feature;
  2. Support MQTT/MQTTS transmission;
  3. Add DO overcrowding alarm feature;
  4. Add DI filer staff/deliverer feature;
  5. Reporting interval range is extended to 5~86400s;
  6. Adjust illuminance of region people counting.
April 2, 2024 V 1.3
  1. Support region dwell time detection;
  2. Support the cumulative number periodic report and trigger report of line cross counting;
  3. Support to reset cumulative count on schedule;
  4. Support to report the data on the dot;
  5. Compatible with Milesight Development Platform;
  6. Support data retransmission;
  7. Support realtime location pushment.
July 30, 2025 V1.4
  1. Add BACnet/IP protocol.
  2. Remote login is compatible with Devicehub 2.0.
  3. Add configuration of passwords at login, user passwords are required to contain 4 styles.
  4. Add Log Management.
  5. Support for importing HTTPS certificates.
  6. Add Detection Persistence Time Setting.
  7. Privacy mode switching is available on the web page.
  8. Customized Region Name for Region People Counting.
  9. Add High-Sensitivity Mode to improve the trigger reporting speed.
  10. Add 5 timestamps to reset cumulative data.