Preface

Copyright Statement

This guide may not be reproduced in any form or by any means to create any derivative such as translation, transformation, or adaptation without the prior written permission of Xiamen Milesight IoT Co., Ltd (Hereinafter referred to as Milesight).

reserves the right to change this guide and the specifications without prior notice. The latest specifications and user documentation for all Milesight products are available on our official website http://www.milesight.com

Safety Instruction

These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. Milesight will not shoulder responsibility for any loss or damage resulting from not following the instructions of this operating guide.
Warning: Serious injury or death may be caused if any of these warnings is neglected.
  • The installation must be conducted by a qualified person and should strictly comply with the electrical regulations of the local region.
  • Before installation or maintenance, make sure to keep the power off.
  • Make sure all wires are connected, and unused cables must be insulated and secured.
  • Please contact the after-sales service for equipment failure, do not try to repair it yourself.
CAUTION: Injury or equipment damage may be caused if any of these cautions are neglected.
  • Make sure this product is suitable for your system and meet the voltage and current requirements before installation.
  • The device is intended only for indoor use.
  • Please strictly follow the wiring diagram for wiring installation.
  • Do not pull the cable too hard, otherwise the product will be damaged.
  • Please confirm that the fasteners are suitable for this product before installing on the wall.

  • Do not leave any object inside the device during installation.

  • The device is not intended to be used as a reference sensor, and Milesight will not should responsibility for any damage which may result from inaccurate readings.

  • The device must not be disassembled or remodeled in any way.

  • Do not place the device close to objects with naked flames.

  • Do not place the device where the temperature is below/above the operating range.

  • The device must never be subjected to shocks or impacts.

  • In order to protect the security of the device, please change device password when first configuration. The default password is 123456.

Revision History

Release Date Version Revision Content
June 16, 2025 V1.0 Initial version
August 4, 2025 V1.1 Add 2-wire valve mode downlink command