Preface
Copyright Statement
This guide may not be reproduced in any form or by any means to create any derivative such as translation, transformation, or adaptation without the prior written permission of Xiamen Milesight IoT Co., Ltd (Hereinafter referred to as Milesight).
reserves the right to change this guide and the specifications without prior notice.
The latest specifications and user documentation for all Milesight products are
available on our official website http://www.milesight.com
Safety Instruction
These instructions are intended to ensure that user can use the product correctly to
avoid danger or property loss. Milesight will not shoulder responsibility for any
loss or damage resulting from not following the instructions of this operating
guide.
CAUTION: Injury or equipment damage may
be caused if any of these cautions are neglected.
- Make sure this product meets the voltage and current requirements before installation.
- The device is intended only for indoor use.
- Do not pull the cable too hard, otherwise the product will be damaged.
- Please confirm that the fasteners are suitable for this product before installing on the wall.
- Do not leave any object inside the device during installation.
- The device is not intended to be used as a reference sensor, and Milesight will not should responsibility for any damage which may result from inaccurate readings.
- The device must not be disassembled or remodeled in any way.
- Do not place the device close to objects with naked flames.
- Do not place the device where the temperature is below/above the operating range.
- The device must never be subjected to shocks or impacts.
- To protect the security of the device, please change device password when first configuration. The default password is 123456.
Revision History
| Release Date | Version | Revision Content |
|---|---|---|
| Oct. 20, 2025 | V1.0 | Initial version |