System

The System page is as below:

The meanings of the items on System page can be referred to the table below:

Table 1.
Parameters	Function Introduction
Device Name	The device name can be customized. It will be seen in file names of video files
Product Model	The product model of the camera
Hardware Version	The hardware version of the camera
Software Version	The software version of the camera can be upgraded
MAC Address	Media Access Control address
Reboot	Click the button to reboot the device
Auto Reboot	Set day and time for reboot, and the NVR will reboot automatically at the set time. Day:Everyday, Monday, Tuesday, Wednesday, Thursday, Friday, Saturday and Sunday. Time: Adjustable range from 00:00:00 to 23:59:59. Note: Make sure the camera’s version are 4X.7.0.78 or above.
Reset	Click the button to reset the settings to the default one. Keep the IP Configuration: keep the IP configuration when resetting the device. Keep the User Information: keep the User configuration when resetting the device. Note: If you disable the “Keep the User Information” option when resetting the device, the device will be reset to the ‘Inactive’ status, you need to set a password for it again.
Local Upgrade	Click the button to import the firmware file from PC, and click the [Upgrade] button to upgrade. And you can enable option to restore the settings to the default one after upgrading the device.
Online Upgrade	Click the [Check]button to check for update. Click OK to update to the latest version when new version is detected.
Import Configuration File	Click the button to import the configuration file from PC, and click [Upload] button to import the configuration file.
Export Configuration File	Click [Backup] button to export the configuration file.
Export Diagnose File	Click [Backup] button to export logs and system information of the device operation status.