Video
The Video page is as below:
-
General camera
-
Area Cropping camera
The meanings of the items on Video page can be referred to the table below:
|
Parameters |
Function Introduction |
|---|---|
| Record Stream Type |
This function supports separate settings of different bit rate and frame rate for different Recording Stream Types including General and Event. For example, you can set lower frame rate or bit rate for General
recording while higher frame rate or bit rate for Event recording.
The recording storage space can be greatly reduced by using this
function.
Note: Event Record Stream Configuration includes Events
like Motion Detection, VCA, Camera Alarm Input and Smart
Analysis. |
| Video Codec |
H.265/H.264 available |
| Frame Size |
Options include 4M(2592*1520),3M(2048* 1536), 1080P(1920*1080), 2M(1600 *1200), 1.3M(1280*960), 720P(1280*720), D1 (704*576) |
| Maximum Frame Rate |
Maximum refresh frame rate per second |
| Bit Rate |
Transmitting bits of data per second, this item is optional only if you select the H.264 |
| Smart Stream |
Smart Stream mode remarkably reduces the bandwidth and the data storage requirements for network cameras while ensuring the high quality of images, and it is a 10-level adjustable codec. It is optional to turn On/Off Smart Stream mode. Level: Level 1~10 are available to meet your need. |
| Bit Rate Control |
CBR: Constant Bitrate. The rate of CBR output is constant VBR: Variable Bitrate. The rate of VBR output will be variable according to the occupation of bandwidth |
| Profile |
The option is for H.264. Base/Main/High can be selected according to your needs |
| I-frame Interval |
Set the I-frame interval to 1~120, this item is optional only if you selected the H.264 |
