User Guide
- About this Guide
  This guide provides instructions for setting up, deploying, configuring, operating, and maintaining the UG63 gateway.
- Product Introduction
- First Start
  This chapter describes the required steps to complete the basic setup, and verify that the gateway is ready for deployment.
- Gateway Installation
  This chapter describes the preparation and installation procedures for mounting the gateway at the deployment site.
- Web GUI Configuration
  - Status
    The Status page displays the device's basic information and operational status.
  - Packet Forward
    The gateway can work as a packet forwarder to set up communication between LoRaWAN^® end devices and a LoRaWAN^® network server. This chapter describes how to configure and monitor the packet forwarder.
  - Network Server
    The gateway can work as a LoRaWAN^® network server when the packet forwarder type is set to Embedded NS. This chapter describes how to use the gateway embedded network server.
  - Network
  - Service
  - System
  - Maintenance
    This chapter describes the logs, maintenance tools and features.
- Services
MQTT and HTTP Application Guide

Web GUI Configuration

This chapter describes the web GUI configuration for the gateway. Before starting configuration, make sure you have accessed the web GUI.