Auto Tracking

• Auto Tracking (for AI PTZ cameras)

Milesight CMS supports Auto Tracking function on PTZ Camera Series. The setting steps are shown as below:

Step1: Check the checkbox to enable Auto Tracking;

Step2: Enable “Show Tracking” to show tracking in Auto Tracking function;

Step3: Set detecting sensitivity;

Step4: Set Max. Tracking Time which must be between 5~300s. The camera will stop tracking when the tracking time is up;

Step5:Set Detection Region;

Step6: Select Tracking Zoom Ratio, which includes Auto Mode and Customize.

Tracking Zoom Ratio is used to adjust the zoom ratio of the moving object when using Auto Tracking. PTZ camera would adjust the zoom ratio automatically according to the distance and speed of moving object under Auto Mode. If select Customize, PTZ camera would adjust to the zoom ratio you set before when tracking the target.

How to set Customize Tracking Zoom Ratio:

• Set zoom ratio by clicking button.
• Click to [Set] save your configuration.

Step7: Set Auto Tracking effective time;

Step8: Click the [Apply] button.