Loitering

When objects are loitering in a defined area for a specific period of time, it would trigger an alarm.

  • Loitering(for non-AI cameras)





  • Loitering(for AI cameras)





Step1: Select detection region and enable Loitering detection. Then set minimum loitering time;

Step2: Choose detection object. Check Human or Vehicle attribute, and the camera will alarm once detecting people or vehicle and triggering related events;

Note: This function is supported for all AI cameras.

Step3: Set detection schedule;

Step4: Set Loitering detection region and object size limits.

Note: Support the Irregular Area Drawing function in 4x.7.0.78 version or above of Milesight cameras.

Step5: Set alarm action;

Step6: Set alarm settings. If you enable External Output and choose Constant External Output Action Time, when objects loiter in the selected regions, External Output Action alarm time will be always constant till the alarm is released.

Note: After setting minimum loitering time from 3s to 1800s, any objects loitering in the selected area over the minimum loitering time will trigger the alarm.