Docker

The gateway has built-in the docker. This chapter introduces the docker feature in this gateway.

Prerequisites

  • It is recommended to ensure that the available RAM be at least 1 GB and the available flash memory be at least 6 GB.
  • SSH or TELNET access service is enabled in General settings.
  • Any SSH/TELNET tool: Putty, etc.

Basic Steps

  1. Open an SSH/TELNET tool, and enter the gateway's IP address to access the CLI.
  2. Log in to the CLI using the username admin, and the same password as the web GUI.
  3. Enter the commands to check docker info and operate as required. For more details, please refer to docker docs.