Day/Night Settings

Referring to the following table for the illustration of each item on the image page:
Parameters |
Function Introduction |
---|---|
Exposure Level | Level 0~10 are available to meet your need |
Minimum Shutter | Minimum Shutter is the same as Maximum Exposure Time. Set the minimum Shutter to 1~1/100000s |
Maximum Shutter | Maximum Shutter is the same as Minimum Exposure Time. Set the maximum Shutter to 1~1/100000s |
Limit Gain Level | Set the Limit Gain Level to 1~100 |
IR-CUT Latency | The interval time of switching one mode to another |
IR-CUT | Turn on or turn off IR-CUT |
LED | Turn on or turn off IR-LED |
Color Mode | Select B/W or Color mode under Day/Night mode |
Edit | Edit the parameters above |