Privacy Mask

  • For non-AI series

It supports up to 24 areas, the setting steps are as below:



Step1: Enable the Privacy Mask function;

Step2: Choose the mask color;

Step3: Hold down the mouse to draw the area in the preview window and click [Add] button to apply settings;

Step4: Click the button to delete mask area, or click [Delete All] button to clear all drawn areas, then click the [Apply] button.

  • For AI series

It supports up to 28 areas, which include 24 mask areas and 4 mosaic areas.

Note: Make sure your camera version is Vxx.7.0.79 or above.

The setting steps are as below:



Step1: Enable the Privacy Mask function;

Step2: Choose the mask type as Mask or Mosaic;

Step3: Hold down the mouse to draw the area in the preview window. If you choose the mask type as Mask, you can Change the color of Mask area, there are eight colors available: White, Black, Blue, Yellow, Green, Brown, Red and Purple.

Step4: Click button to enable or disable the corresponding areas, or click button to delete the areas.

Step5: click the [Apply] button to apply the settings, or click [Delete All] button to clear all drawn areas.

Note: If you choose other display modes of fisheye camera under Multi-channel or Bundle-Stream mode except display mode with Original view, then you can not use the function.