Preface
Product Introduction
Power Supply
This chapter describes the power supply options of the device. These options cannot be used at the same time.
ToolBox Configuration Guide
- Access the Device
  This section describes how to access the status and configuration page of the device via NFC or Bluetooth. NFC and Bluetooth are both enabled by default.
- Time Synchronization
  This section describes how to sync the time of the device.
- Communication Settings
  This section describes the communication settings for different applications.
- LoRaWAN^® Settings
  This chapter describes how to configure the LoRaWAN^® parameters for communication between the device and LoRaWAN^® gateways.
- General Settings
  This section describes the basic settings of the device.
- Calibration Setting
  This section describes the steps to calibrate the sensor data.
- Schedule Plan Settings
  The device supports adding different kinds of schedule plans to achieve the automatic temperature control.
- Maintenance
  - Upgrade
    This chapter describes the steps to upgrade the device via ToolBox App.
  - Backup and Restore
    This section describes how to backup the configuration of a device and import to other devices.
  - Reset to Factory Default
    This section describes how to reset the device via Milesight ToolBox App.
Installation
Uplink and Downlink
BACnet Object List
Services

Upgrade

This chapter describes the steps to upgrade the device via ToolBox App.

Download firmware from Milesight official website to your smartphone.
Read the target device via ToolBox App, click Upgrade to upload the firmware file.
Click Upgrade to upgrade the device.
Note: Operation on ToolBox is not supported during an upgrade.