Home
Operation Guide
Maintenance
Backup and Restore
This device supports configuration backup for easy and quick device configuration bulk. Backup and restore are allowed only for devices with the same model and frequency band.

Preface
Product Introduction
Hardware Introduction
Operation Guide
- ToolBox Configuration Guide
  This chapter describe the steps to quickly configure this device to set up the connection with LoRaWAN^® gateway and network server. If you require more advanced settings, please refer to the operation guide chapter.
- LoRaWAN^® Settings
  LoRaWAN settings are used for configuring the transmission parameters in LoRaWAN^® network.
- Time Settings
- General Settings
  General settings include the basic parameters of the device.
- RS485 Settings
  UC100 supports to set up communications with RS485 via two ways: Modbus channels or Modbus RS485 bridge LoRaWAN^®.
- IF-THEN Command
- Milesight D2D Settings
- Maintenance
  - Upgrade
    This chapter describes the steps to upgrade the device via ToolBox software.
  - Backup and Restore
    This device supports configuration backup for easy and quick device configuration bulk. Backup and restore are allowed only for devices with the same model and frequency band.
  - Reset to Factory Default
Installation
Uplink and Downlink
Services

Backup and Restore

This device supports configuration backup for easy and quick device configuration bulk. Backup and restore are allowed only for devices with the same model and frequency band.

1. Configure the device and save the settings.

2. Go to Maintenance > Backup and Reset, click Export to save the current configuration as json format template file.

3. Connect another target device to the same computer and log in the device via ToolBox software.

4. Go to Maintenance > Backup and Reset page, click Import to import the template file.