Preface
Product Introduction
Hardware Introduction
Operation Guide
- ToolBox Configuration Guide
  This chapter describe the steps to quickly configure this device to set up the connection with LoRaWAN^® gateway and network server. If you require more advanced settings, please refer to the operation guide chapter.
- LoRaWAN^® Settings
  LoRaWAN settings are used for configuring the transmission parameters in LoRaWAN^® network.
- Time Settings
- General Settings
  General settings include the basic parameters of the device.
- RS485 Settings
  UC100 supports to set up communications with RS485 via two ways: Modbus channels or Modbus RS485 bridge LoRaWAN^®.
- IF-THEN Command
- Milesight D2D Settings
- Maintenance
  - Upgrade
    This chapter describes the steps to upgrade the device via ToolBox software.
  - Backup and Restore
    This device supports configuration backup for easy and quick device configuration bulk. Backup and restore are allowed only for devices with the same model and frequency band.
  - Reset to Factory Default
Installation
Uplink and Downlink
Services

Reset to Factory Default

Via Hardware: Hold on the reset button for more than 10s until the LED indicator quickly blinks.

Via ToolBox Software: Go to Maintenance> Backup and Reset to click Reset.